Enjoy quicker cleaning after painting by employing a paint tray liner. Once you are succesfully done painting, it is simple to pour any residual paint into the paint can. Carefully rinsing your paint tray liner will allow you to reuse it many times.



Latex and oil-based paint items and primers are common in most renovations. You may be able to use a latex primer if your walls are pristine or it is a new build. Painting over any wallpaper glue residue or water-damaged wall surfaces will demand a heavier oil-based sealer primer called “Kilz.” This is an excellent item to kill mildew or seal mold and is a good choice for painting over oil-based wood stains that may bleed through layers of new paint. Primer is necessary for many different situations.

Lots of people prefer putting their primer into a metal paint tray. The oil-based primer typically occupies the metal paint tray and then a tray liner is used for latex paint in the same tray after to eliminate oil and water mixing. Take care of your paint tray liner by thoroughly rinsing and drying it after your job. Follow the instructions for cleaning located on your paint can and rinse out your paintbrushes with your paint tray liner at the end of the job.

STORE-BOUGHT TRAY LINERS Vs. DIY

Paint tray liners are normally found with painting equipment. They are reasonably priced and created of pre-formed plastic. They are custom-made to fit inside of your paint tray. Sad to say, most individuals suppose they are single-use-only and disposable. Wash and dry paint tray liners to keep on hand for potential painting projects. They can last you for years of painting projects. Reusing a grimy paint tray liner can mess up your paint job. The residual paint will chip off and get into your new paint, ruining everything. Little flakes and pieces of old paint will glaringly wreak havoc on your new paint job. Simply rinsing the tray liner clean after use will prevent this mess.

This can be completely avoided if you get in to the habit of cleaning your paint tray liner.

Some DIY paint tray liner concepts can potentially get you through your upcoming painting gig.

Make your own paint tray liner with aluminum foil

Use a portion of aluminum foil that is roughly 6” greater than your paint tray. Put the aluminum foil inside the corners of your paint tray. Gently crease the aluminum over the paint tray’s edge. Aluminum foil is ultra delicate and susceptible to easy tearing so go slow. Note that the foil frequently sticks to the loaded roller. Tiny bits of aluminum foil can easily accidentally turn up on your wall or painted surface. Aluminum foil isn’t the ideal paint liner selection for large jobs. If you are finished painting, return the remaining paint into the can. Roll the used foil up properly and place it in the garbage whenever your painting is complete.



Create a paint tray liner with plastic bags

Some people rely on plastic shopping bags or kitchen-sized waste bags to line their paint tray. Position the paint tray into the actual plastic bag. Next, turn the tray over and tape the plastic bag’s individual ends with each other. Once you are all done painting, place any leftovers into the paint can.

Cleaning up with this technique is simple. Go ahead and take bag out of of the paint tray easily by pulling the bag inside out. If you're not considering reusing your paint roller or washing it out, you can put it into the bag. Utilize the bag to pull the roller sleeve off of the cage. This helps you avoid getting toxic paint on your skin. Lastly, tie the bag shut and put it into the garbage. Lastly, tie the bag shut and put it into the garbage.

Is a paint tray liner truly necessary?

Some people feel that they do not require a paint tray liner to perform their work. It is common for plenty of folks to directly pour their paint into their tray. When you're done, return any surplus paint to your can. You may opt to enable the paint to dry instead of washing your tray out. Nevertheless, this will generate a heavy paint tray sooner or later as layers of solidified paint grow with time. This is why cleaning up your paint tray after each and every use is recommended. It's possible to destroy your newly coloured surface because fresh paint might dissolve previous layers of old paint in the holder and transfer to your new finish.

Liners may be better for oil-based products to shorten cleaning. However, latex paint only requires water to clean paint brushes and the liner making it possible to skip the liner since cleanup is simpler. Instantly fill your paint tray with water and incorperate your brushes or rollers to soak after you finish with your latex paint to simplify cleanup. Have fun with your painting experience regardless of what route you take.