Basic Surface Preparation
Surface items need adequate preparation for the finest results. All surfaces that'll be painted really need to be dry, clean and free of waxes, mildew, oils, grease, dirt, or any surface toxins. Work with soapy, warm water to wash away any dirt or chalk with some light cleansing. A commercial wax stripper may be necessary if you are removing surface wax. Choose a grease or oil emulsifier to take care of slick applications.
Even though prep time will take time, it is essential for helping you achieve professional results. First, remove all shedding, cracking and loose chipping paint from areas that were painted before. Employ sanders, wire brushes, hand-scraping tools, electric grinders and the proper tools to complete sanding. All metal regions have to be free from chips, corrosion and mill scale. Replace or repair any delaminated, broken surface locations.
Next, carefully sand the rough paint edges beside the surface area. All high-gloss portions require sanding to generate light scratches and a dull finish so the paint can adhere properly. Vacuum after sanding to get rid of all dust and debris before painting.
Best Application Methods
Make use of a paintbrush or a roller in order to apply Cabinet Coat. Some individuals would rather spray and use the HVLP method. It is important to stir the product ahead of applying. Try to maintain a wet paint edge when you are brushing and rolling when you cover portions that have been coated previously. This product dries extremely fast and could show brush marks or roller marks if the product is over-saturated. Cabinet Coat is best utilized when the ambient and surface temperature are more than fifty degrees Fahrenheit and less than 90 degrees Fahrenheit. Don’t utilize this product if there is any possibility of moisture touching down on the wet paint.
Clean Up
As soon as you are done painting, use soapy, warm water to clean. Immediately after thoroughly washing your hands, soak your equipment, paint rollers and brushes. Ensure proper disposal for health and safety standards. A local recycling location normally takes empty and dry containers. Be diligent to find out what your neighborhood disposal requirements are with your sanitation division. Consult your local environmental agency to find out which disposal choices will be suitable.
Health, Safety and Environmental Information
Precise air circulation is essential at all times. Refrain from inhaling the spray mist or sanding dust at all times. Be sure that there is a fresh air entry for safe application and drying. Wear proper safety gear to ensure no product comes in touch with the skin or the eyes. Stay shielded from spray mist and dust by selecting an approved NIOSH respirator. Ensure accurate respirator use by following instructions from the manufacturer. Wash your hands before and after use and make sure the container is always closed when you're finished the application.
Know the FIRST AID Requirements Before Using
Flush with water for a minimum of fifteen minutes if any product penetrates the eyes. In case any product touches your skin, count on soap and water to thoroughly clean it away. Don’t hesitate to seek medical attention if required. In the event of breathing difficulty, get to fresh air ASAP and request medical treatment if needed.
